[. . . ] €¢ Store idle laser out of reach of children and other untrained persons. €¢ Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one laser, may create a risk of injury when used on another laser. €¢ Do not use optical tools such as a telescope or transit to view the laser beam. [. . . ] It will blink to indicate that the batteries need to be replaced and the tool will automatically shut down. €¢ Switch off the tool and remove the batteries as soon as the indicator blinks. C1 - C4) The tool facilitates various set-ups, making it useful for several applications. Floor set-up • Place the tool on a relatively smooth and level surface. C1) The keyhole (12) in the pivot bracket (8) is used for mounting to wall constructions. Alternatively, the tool can be attached to metal studs directly using the magnets (13). C2 - C4) The tool has been equipped with a wall mount (9) for mounting to wall track to aid in drop ceiling installation and other specialty leveling projects. The pivot bracket (8) has magnets to attach the tool to the wall mount. €¢ Align the magnets (13) with the metal plate on the wall mount (9). €¢ To remove the wall mount, pull the wall mount from the tool applying sufficient force. 48 ENGLISH To fit the wall mount to wall track, proceed as follows: • Open the clamp jaws (14). €¢ Place the clamp jaw around the wall track and release the clamp to close the clamp jaws shut on the track. To mount the wall mount to a wall, proceed as follows: • Hold the tool at the desired position against the wall and mark the location of the mounting hole on the wall. Adjusting the tool • To initiate the leveling procedure, switch on the tool. The level and/ or plumb orientation is correctly adjusted as long as the laser beams remain on. €¢ The laser beams start flashing to indicate that the tool has been set up at a slope that is beyond the self-leveling range of 4°. Switch the tool off, re-adjust the tool set-up within the self-leveling range and switch the tool on again. D) • Align the laser line of either one of the laser beams with the position mark. Do not place the laser in a position which may cause anyone to intentionally or unintentionally stare into the laser beam. 49 ENGLISH Instructions for use WARNING: Always observe the safety instructions and applicable regulations. €¢ Extreme temperature changes cause movement of internal parts that may affect the accuracy of the tool. Regularly check the accuracy while using the tool under these circumstances. [. . . ] This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area. €¢ 30 DAY NO RISK SATISFACTION GUARANTEE • If you are not completely satisfied with the performance of your DEWALT tool, simply return it within 30 days, complete with all original components, as purchased, to the point of purchase, for a full refund or exchange. The product must have been subject to fair wear and tear and proof of purchase must be produced. [. . . ]